Approvals
Sierra Spray Painting Ltd. was established in 1996, our goal was to service the manufacturing industry with special requirements for coating finishes as well as other processes. Sierra over the years has achieved these goals both in innovation and custom design for process abilities. We are pleased to offer you the following services. *Including, but not limited to the following servicing.
PS13630 - Painting of F-15 Aircraft.
PS13646 - Painting of F/A-18 and AV-8 Aircraft.
BAC 5307 - Part Marking.
BAC 5720 - Protection Of The Interior Of Structural Tubing.
BAC 5736 - Application Of Chemical And Solvent Resistant Finishes.
BAC 5748 - Abrasive Cleaning, Deburring, And Finishing.
BAC 5845 - Application of Polyurethane Enamel.
BAC 5877 - Application Of Organic Corrosion Inhibiting Compounds.
BAC 5882 - Application of Urethane Compatible Primer.
BMS 10-11 - Chemical And Solvent Resistant Finish.
BMS 10-60 - Protective Enamel.
BMS 10-79 - Urethane Compatible, Corrosion Resistant Primer.
BMS 3-26 - Organic Corrosion Inhibiting Compounds, Heavy Duty.
|
DCMP-151 - Coating, Metallic-Ceramic.
DCMP-152 - Paint Instructions.
DCMP-214 - Paint Instructions White Col our #17925.
PCS-2500 - Polyurethane Paint Two-Coat Process.
PCS-2501 - Polyurethane Paint Three-Coat Process.
PCS-2530 - Low Voc Polyurethane Paint.
PCS-2621 - Alkaline Degreasing of Parts.
PCS-2800 - Temporary Corrosion and Damage Protection.
PCS-6000 - Marking of Materials, Parts, and Assemblies.
|
GAMPS 3103 - Primer Coating, Epoxy, Preparation and Application of (Including Gulfstream Finish No. 2012)
GAMPS 3205 - Coating: Gloss Epoxy Finish, Application of (Includes Finish 2013)
GAMPS 7115 - Requirements for sealing pressurized un-pressurized, and environmental areas.
GMS 5001 - Epoxy Primer Coating, Hydraulic Fluid Resistant (Finish 2012)
GMS 5002 - Epoxy Topcoat System, Hydraulic Fluid Resistant Series 2000.
|
LGPS 1001 - Application of Primer and Topcoat.
LGPS 1600 - Part Identification.
LGQP 5010 - Corrosion Inhibiting Compounds for Finished Parts and Assemblies, List of Qualified Products.
LGQP 6001 - Qualified Supplier List for External Paint Systems: Primer and Topcoat.
|
 U.S. Army Research Laboratory
MIL-C-16173 CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
MIL-C-22750 Coating, Epoxy - Polyamide
MIL-C-8514 Coating Compound, Metal Retreatment, Resin-Acid (ASG)
MIL-DTL-11195 Enamel, Lusterless, Fast Dry, VOC Compliant
MIL-DTL-14072 Finishes for Ground-Based Electronic Equipment
MIL-DTL-16232 Phosphate Coating, Heavy, Manganese, or Zinc Base
MIL-DTL-18264 Organic, Weapons System, Application and Control
MIL-DTL-24441 Paint, Epoxy-Polyamide, General Specification
MIL-DTL-53022 Primer, Epoxy Coating, Corrosion Inhibiting, Lead & Chromate Free
MIL-DTL-53030 Primer Coating, Epoxy, Water Based, Lead and Chromate Free
MIL-DTL-53039 Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
MIL-DTL-53072 Chemical Agent Resistant Coating (CARC) System Application Procedures And Quality Control Inspection
MIL-DTL-5541 Chemical Conversion Coatings On Aluminum And Aluminum Alloys
MIL-DTL-64159 Coating, Water Dispersible Aliphatic Polyurethane, Chemical Agent Resistant
MIL-E-15090 ENAMEL, EQUIPMENT, LIGHT GRAY (NAVY FORMULA NO. 111)
MIL-HDBK-454 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
MIL-P-15328 Metal Wash Primer
MIL-P-53022 Primer, Epoxy Coating, Corrosion Inhibiting, Lead & Chromate Free
MIL-P-85891 Plastic Media, For Removal Of Organic Coatings
MIL-PRF-14105 Paint, Heat-Resisting (for Steel Surfaces)
MIL-PRF-16173 Corrosion Preventative Compound, Solvent Cutback, Cold-Application
MIL-PRF-22750 Coating, Epoxy, High-Solids
MIL-PRF-23377 Primer Coatings: Epoxy, High-Solids
MIL-PRF-24667 COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION
MIL-PRF-24712 Coatings, Powder (Metric)
MIL-PRF-32033 LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE (WATER-DISPLACING, LOW TEMPERATURE)
MIL-PRF-32348 PERFORMANCE SPECIFICATION POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS
MIL-PRF-46010 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code – S-1738
MIL-PRF-81352 Coatings, Aircraft Touch-Up
MIL-PRF-81733 MIL-PRF-81733 TYPE III SEALANT
MIL-PRF-85285 Coating: Polyurethane, Aircraft, And Support Equipment
MIL-PRF-85582 Primer Coatings: Epoxy, Waterborne
MIL-R-81294 Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems
MIL-STD-130 Identification Marking Of U.S. Military Property
MIL-STD-13231 Marking of Electronic Items
MIL-STD-1504 ABRASIVE BLASTING
MIL-STD-171 Finishing Of Metal And Wood Surfaces
MIL-STD-642 IDENTIFICATION MARKING OF COMBAT AND TACTICAL TRANSPORT VEHICLES
MIL-STD-865 SELECTIVE, BRUSH PLATING, ELECTRO-DEPOSITION
MIL-STD-871 Electro-Chemical Stripping of Inorganic Finishes
MIL-T-704 Treatment and Painting of Material
| 
HPS-170 - General Requirements for Painting.
PPS 17.02 - STRIPING BY ABRASIVE BLASTING.
PPS 34.01 - Application of Cellulose Nitrate Lacquer (F2 & F4).
PPS 34.08 - Application of Epoxy-Polyamide Primer.
BAPS 138-043 - Application of Epoxy Polymide Primer.
BAPS 138-044 - Application of Epoxy Polymide Enamels.
|
*Be advised that we are not limited to the above services. If the required specification is not listed, please call our offices to have our quality department verify the availability of the required specification.
|
AS9100 Rev. B / ISO 9001:2000
